Window Clings are printed at near photo quality on glossy material suitable for indoor or outdoor use. Ideal for POP signage on glass or other very smooth, clean surfaces. Window Clings should be applied on a surface that is as close to room temperature as possible. Excessive heat or cold will not allow the product to cling to the surface.
Clear Window Clings are 8mil thick with a paper backer that will be peeled off prior to application. Material will only cling on the front side of the print. White ink is required as an overprint for added opacity and vibrant color.
Design your cling using the full-bleed size. Keeping text and important design embellishments at least .25 from the edge.
Full-bleed Size: add .0625" to each dimension, 300 DPI, CMYK mode
Meaning 3" x 3" should be 3.125" x 3.125"
With Clear Window Clings, you MUST use white ink as an overprint so your printed graphic can be opaque in some areas and transparent in others. This will allow for vibrant, crisp color. Similar to Spot UV masks, White Mask files are separate from your artwork files and black color indicates where the white ink will print. Make sure to create your mask file the same size as your color art file. This will prevent alignment issues during printing. Note: White Masks must be made in vector format and be saved as EPS or PDF and use 100% K.
If your Clear Window Cling is intended to be viewed from the outside of a window, the artwork should be reversed prior to submission.
3" x 3"
3" x 4"
4" x 4"
4" x 6"
5" x 5"
5" x 7"
6" x 6"
6" x 9"
12" x 18"
4 business days